Call us
+919975343391Commercial Hot Water Storage Tank
We have gained immense appreciation from clients for supplying an excellent range of Commercial Hot Water Storage Tank. These tanks are installed with solar heating systems for storing water. Completely safe to use, these storage tanks are constructed using food grade stainless steel with an excellent coating on the inside. This Commercial Hot Water Storage Tank is stringently tested on various standard quality parameters before the final dispatch in market.
Features:
Hot Water Storage Tank
Features
Glass enamel coating on inner tank
Advantages
Technical Specifications
HOT WATER STORAGE TANK SPECIFICATIONS | |
Material of storage tank | Glass enamel coated on special steel |
Insulation | CFC free PUF Thickness: 50 mm |
Outer cladding | Pre-coated steel colour (RAL 7035) |
Safety valve | Air vent for Thermosyphon system and 6 bar safety valve for pressurised system |
Electrical backup heater | 2 kW backup heater |
Working pressure | 6 kgf/cm2 |
Tank construction | Jacket type heat exchanger |
Tank protection | Aluminium anode with in-built replacement provision |
Tank capacity | 100, 200, 300 and 500 LPD |
Collector Specifications
Absorber construction | Single sheet absorber |
Absorber coating | High selective coating with Absorptivity: 0.95+/-0.02- Emissivity: 0.047+/-0.02 |
Riser | Copper tube: 12.7mm |
Header | Copper tube: 25.4mm |
Bonding-header and riser | Brazing |
Bonding-absorber and harp | Laser welding |
Back Insulation | 50mm Rockwool with Owens corning black sheet |
Side insulation | CFC free PUF- Thickness: 25mm |
Collector Size | 2050x1040x100mm |
Collector material | Extruded aluminium with blue colour powder coating |
Collector back sheet | Aluminium |
Glazing | Solar glass thickness 3.2mm |
Retainer key for glass | Extruded aluminium, with olive green colour powder coating |
Rubber beading for glass | EPDM rubber |
Absorber area | 2m2 |
Heat transfer media | Glycol mixture |
Weight of collector (dry) | 38 kgs |
Collector area | 2.132m2 |
Maximum working pressure | 8 kgf/cm2 |
Mounting system (Stand) | |
Material | Mild steel structure with olive green colour powder coating |
Connections | |
Material | Composite pipe with brass end fitting |
System colour | |
System colour | Olive green (RAL7002 & RAL7035) |